Phantom MIRO LC320S

1920 x 1200 1,380
1920 x 1080 (HDTV) 1,530
1152 x 1152 2,240
1024 x 1024 2,770
1280 x 800 2,940
1280 x 720 3,200
640 x 480 8,300
512 x 512 9,200
384 x 288 19,000
256 x 256 26,400
128 x 128 62,000
128 x 64 102,000
64 x 8 240,000
Short Description
This >2 megapixel camera with 3.2 Gpx/s throughput sets a new standard for price/performance and ease-of-use in the high-speed imaging industry. The maximum resolution is 1920 x 1200, but other common resolutions such as 1152 x 1152 are also available. At 1920 x 1080 HD resolution, the camera can shoot over 1500 frames-per-second. And, the camera sports a number of advanced features such as: CineFlash storage, Canon EOS lens mount, internal capping shutter and an on-board battery, all in a small, rugged package.

3.2 Gpx/s
Maximum speed at full resolution of 1920 x 1200 is 1380 fps
At 1920 x 1080, you can achieve over 1500 fps and at 1152 x 1152, over 2200 fps
Maximum speed at reduced resolution of 64 x 8 is 240,000 fps
Minimum frame rate of 24 fps
Shutter speeds down to 1 microsecond

Sensor Specifications
1920 x 1200 pixels
10 µm pixel size
19.2 mm x 12.0 mm
12-bit depth
ISO 8,900 T mono, 1,100 T color (ISO 12232 SAT method)
TE cooled
CAR in 64 x 8 increments
Fill factor: 70%
Dynamic range: 55 dB
Read out noise at 45°C: 21e-
QE at 530nm: 57%
Full well capacity 11500e-

1 µs minimum exposure
Global electronic shutter
Extreme Dynamic Range (EDR)
Auto Exposure
Shutter Off mode for PIV applications

3GB, 6GB, 12GB high-speed internal RAM
Slot for CineFlash support)

Record Times
2.3 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory

Special Features
Segment memory for up to 16 cines in multi-cine mode
Image-Based Auto-Trigger
Continuous recording
Memory gate
Event marking
Frame timestamp
IRIG In (modulated or unmodulated)
IRIG Out (unmodulated)
Shutter off mode for PIV exposure
1.4µs straddle time (mono)
Burst mode
Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
Secondary IP address
Field-based firmware upgrade capable
Autoset feature

Programmable trigger location (pre/post trigger recording)
Image Based Auto Trigger standard
Trigger from software
Hardware trigger on capture cable

Timing & Synchronization
20ns timing accuracy
Frame synchronization to internal or external clock (FSYNC)
IRIG In (modulated or unmodulated)
IRIG Out (unmodulated)

Capture connector (Trigger, Ready, IRIG In, Video, IRIG Out, Aux)
(Aux signal can be assigned to Event, Strobe or Memgate)
Dedicated FSYNC and connection on camera body

Ethernet Connection
Gb Ethernet for both control and data

Camera Control
Phantom Camera Control software (PCC)
Flip-out LCD Touchscreen on LC-Series
Remote Control Unit (RCU)
SDK available

Video Out
HD-SDI from BNC on rear of camera. Standard 720P, 1080i and 1080psf signals are supported.

Canon EOS
Nikon F-mount
Nikon F mount adapter (allows the use of F-mount lenses on EOS mount)
1" C-mount

Supported File Formats
Cine, Cine Compressed, Cine RAW, AVI, Multipage TIFF, MXF PAL, MXF NTSC, QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

12 - 28 VDC, 65 W
100 - 240 VAC power supply included
Rechargeable battery (Sony BP-U30 or BP-U60)

Mechanical Specifications
7.5 x 3.5 x 4 inches, 19 x 9 x 10 cm (L x W x H without lens or battery)
(LC-Series is 8 mm wider than the M-Series)
Weight: 3.0 lbs, 1.4 kg (without CineFlash, lens or battery)

Environmental Specifications
Operating Temperature and Humidity: 0°C - 40°C @ 8% to 80% RH
Storage Temperature: -20°C to +70°C
Shock:25G, half sine wave, 11 ms, 10 times all axes (without lens) (M-Series)
Vibration: 0.25G, 5-500 Hz, all axes (without lens)

Ships Standard With
Power supply
Ethernet cable
Battery, battery charger
60GB CineFlash and dock
Capture cable
PCC software

Upgrade bundled 60GB CineFlash to 120GB or 240GB
Lens mount choice

Popular Accessories
Remote Control Unit
Spare batteries, battery charger
Additional CineFlash modules
Battery belt