Phantom Flex

FPS (Std)
2650 x 1600 1,455 725
1920 x 1080 (HDTV 16:9) 2,570 1,275
1280 x 720 (HDTV 16:9) 5,350 2,640
640 x 480 10,750 5,285
Short Description
The Phantom Flex introduces new degrees of flexibility not available on any other digital cinema camera. And, it goes beyond HD and supports 4 megapixel imaging when the ultimate in image resolution is required.

6 Gpx/second
Record direct to CineMag at up to 800 Mpx/second

Sensor Specifications
2560 x 1600 pixels
10 µm pixel size
25.6 mm x 16.0 mm
12-bit depth
ISO 800
TE cooled
Dynamic range: 10 stops

1 µs minimum exposure in Standard mode
Exposure range in HQ mode is dependent upon frame rate
Global electronic shutter

8 GB, 16 GB, 32 GB high-speed internal RAM
CineMag for non-volatile storage (128 GB, 256 GB, 512 GB)

Record Times
10.3 seconds at 1000 fps, 12-bit depth, 1920 x 1080 resolution and into 32 GB of internal memory (Standard mode), 5.1 seconds in HQ mode

Special Features
Dual shooting modes:
Standard mode for highest frame rates
HQ mode for ultimate image quality
Segment memory for up to 63 cines in multi-cine mode
SMPTE in/out
Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
Mounting plates for optional gear on side and handle

Programmable trigger location (pre/post trigger recording)
Trigger from software
Hardware trigger BNC
Trigger inputs also available on Aux ports

Timing & Synchronization
20 ns timing resolution
Frame synchronization to internal or external clock (FSYNC)
Strobe output

Dual-link HD-SDI
Genlock BNC
Trigger BNC
Timecode In BNC
Timecode Out BNC
Remote (RCU) port
Viewfinder port
Two 12VDC (1.5A) Aux ports (with trigger signal available)

Ethernet Connection
Gb Ethernet for both control and data

Camera Control
Phantom Camera Control (PCC)
On-Camera Controls
Remote Control Unit (RCU), connects direct to camera

Video Out
Dual-link HD-SDI
Component viewfinder port

PL-mount standard
Nikon F-mount optional
Canon EOS optional
B4 lens support through the use of an adapter

Supported File Formats
Cine RAW, uncompressed QuickTime, TIFF
with additional Software: FCP plugin, DPX conversion, RAW workflow

100 - 240 VAC, 150 Watt power supply included
20-36 VDC battery input
Two power connectors for hot-swapping battery power or having battery backup when on AC power

Mechanical Specifications
Size (without lens, CineMag or handle): 11.5 x 5.5 x 5.0 inches (L x W x H); 29.2 x 14 x 12.7 cm
Weight (without lens or CineMag): 11.75 lb; 5.33 kg

Environmental Specifications
Temperature: 0°C - 40°C
Humidity: 80% non-condensing at 5°C

Popular Accessories
Spare Cable Kit
Spare CineMag interface pin array
645, PL, Super-PL and F-mount lens mounts